| Field | Description |
|---|
| Create Activity
|
To create activities in the Activity Manager when you generate the report, select this check box.
DPS displays the Activity dialog box so that you can enter information about the activity, including its type (email, phone call, meeting, touchpoint, and so on), primary contact, and date/time.
DPS creates an activity for each record included on the report.
|
| Type
|
Specify which of the following types of labels you are printing addresses on:
- Avery 5160 (three labels across on a standard 8.5" x 11" page)
- Avery 5161 (two labels across on a standard 8.5" x 11" page)
- Avery L7163 (two labels across on a standard 8.26" x 11.69" A4 page)
- User-defined (any other label format)
When you select a type of label,
DPS sets the other options in the
Print Setup section to default measurements.
If you select one of the standard types of labels, print a test page to check the alignment of the information on the labels. If the alignment is not correct, change the default measurements.
If you select
User-defined, take the required measurements from a sheet of labels and enter them in the
Print Setup section.
If you make any changes to the default settings or if you enter settings for a user-defined label, save the new measurements as a set of saved options or as a favorite, so you do not have to adjust the alignment the next time you print labels.
|
| Top Margin
|
Enter the distance from the top of the page to the top of the first row of labels. Enter the distance using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
If you use inches, enter decimals for fractions. For example, enter
.500 for a margin of one-half inch.
|
| Left Margin
|
Enter the distance from the left edge of the page to the left edge of the first column of labels. Enter the distance using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
If you use inches, enter decimals for fractions. For example, enter
.125 for a margin of one-eighth inch.
|
| Vertical Gap
|
Enter the distance between the bottom of one row of labels and the top of the next row. Enter the distance using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
Enter
0.000 if there is no gap.
|
| Horizontal Gap
|
Enter the distance between the right edge of one column of labels and the left edge of the next column. Enter the distance using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
If you use inches, enter decimals for fractions. For example, enter
.125 for a gap of one-eighth inch.
Enter
0.000 if there is no gap.
|
| Label Height
|
Enter the distance from the top edge of a label to its bottom edge, using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
|
| Label Width
|
Enter the distance from the left edge of a label to its right edge, using the unit of measure (inches or millimeters) that you entered in the
Unit of Measure field.
|
| Number Across
|
Enter the number of labels in each row.
|
| Number Down
|
Enter the number of rows of labels on each page.
|
| Orientation
|
Select one of the following options for the orientation of the page of labels:
-
Portrait: The horizontal dimension of the page is smaller than the vertical dimension.
-
Landscape: The vertical dimension of the page is smaller than the horizontal dimension.
|
| Page Size
|
Select the mailing label page size. The width and height of the page size that you select in this field display in the
Page Width and
Page Height fields.
When you select the
Custom size, the
Page Width and
Page Height fields are enabled so that you can specify the page width and height.
|
| Page Width and Page Height
|
If you select a standard page size, these fields display the width and height of the page size that you select. If you set the page size to
Custom, enter the page width and height in these fields. The measurements display in inches or millimeters based on your setting for the
Unit of Measure field.
|
| Unit of Measure
|
Select the unit of measure, inches or millimeters, to use for the measurement fields under
Print Setup on this tab. When you switch from one unit of measure to the other, the measurements that are currently entered or displayed in the measurement field are automatically converted to the new unit of measure (1 inch = 25.4 millimeter).
|
| Font Name
|
Select the font for the mailing labels. The font that prefills in this field is the default font that you selected in User Settings.
|
| Font Size
|
Select the font size (type size) for the mailing labels.
|
